Connect with us


How To Troubleshoot a Car Window That Won’t Stay Up



Do you have a car window that won’t stay up? Is it causing frustration and stress? If so, you’re not alone. Many car owners have experienced a broken window that won’t stay up. But don’t worry, there are a few steps you can take to troubleshoot the problem and fix your window. Keep reading to find out why your car window won’t stay up.

Defective Power Window Switch

A defective power window switch is one of the common reasons a car window won’t stay up. If the power window switch is broken, it won’t send the necessary electrical signals to the window motor to keep the window in the up position. This issue can occur if the switch is faulty or if the contacts on the switch become corroded. If this is the case, the switch will need to be replaced in order to get the window to stay up. A defective window switch will need to be replaced by a mechanic.

Blown Fuse

One of the most common reasons why your power window won’t stay up is a blown fuse. Your car’s window system is powered by a fuse, and when this fuse gets blown, it interrupts the current that is used to keep your window up. This can happen when the electrical system in your car has a surge of power, which a number of things, including a faulty window motor or a short circuit in your wiring, can cause. One way to identify if the problem is a blown fuse is to note if more than one window has problems. If the problem is with more than one window, replacing a defective fuse might remedy the issue.

When a fuse blows, it can be difficult to tell what caused it. It is important to inspect the fuse and wiring around the window before you go and replace it. If the wiring is frayed or the fuse appears to be burned, it is likely that the cause of the blown fuse is a short circuit. If the wiring appears to be intact and the fuse looks fine, then the cause may be a faulty window motor, which is causing the window to pull too much power from the system.

When the fuse gets blown, it is important to replace it as soon as possible. Replacing the fuse is relatively easy and can be done in a few simple steps. First, locate the fuse box in your car and open it. Next, identify the fuse for the window system and remove it. After that, take the new fuse and place it in the same slot the old one was in, and close the box. Once the new fuse is in place, your window should be operational again.

Bad Window Motor


One of the most common reasons why your car window won’t stay up is a bad window motor. The window motor is the part of the window system that is responsible for powering the window up and down. When the motor is not functioning correctly, the window will not stay up. The motor can become damaged in a number of ways, such as excessive wear and tear over time or due to a sudden jolt or shock. In some cases, the motor may need to be replaced due to corrosion or rust.

If the motor is the cause of the problem, it will usually require professional repair or replacement. If the motor has become damaged due to excessive wear and tear, the technician may be able to repair the motor by replacing the brushes, lubricating the bearings, or replacing the motor itself. If the motor is damaged due to corrosion or rust, it may need to be replaced entirely.

If you have a car window that keeps sliding down, it can be frustrating. From a blown fuse to a defective window motor, there are a few reasons why your window might not stay up. It is important to take the necessary steps to determine the exact cause of the problem, so you can make the appropriate repairs and ensure your car window stays securely in place.